Zhengzhou Global Heavy Industry has many models of multi-cylinder hydraulic cone crushers that can meet different production requirements. The most representative one is the HPY series of cone crushers. We will discuss this series here. For large, medium and small users, we can provide them with suitable machines on the basis of ensuring output and crushing effect. type. In order to meet the various needs of different users, HPY series multi-cylinder hydraulic cone crusher chamber types are mainly divided into EF (ultra-fine), F (fine), M (medium), C (coarse), and EC (extra-coarse). Model, let’s take a look at the detailed parameter list to get a preliminary understanding.
Multi-cylinder hydraulic cone crusher, how to choose the cavity type of cylinder hydraulic cone crusher, multi-cylinder hydraulic cone crusher model
In the parameter table above, we can see that each different model of multi-cylinder hydraulic cone crusher has a different cavity type. So how to choose the cavity type of multi-cylinder hydraulic cone crusher? Choosing the appropriate cavity type is undoubtedly very critical for the production of sand and gravel. It can not only improve the crushing efficiency, but also improve the quality of the output.
Multi-cylinder hydraulic cone crusher, how to choose the cavity type of cylinder hydraulic cone crusher, multi-cylinder hydraulic cone crusher model
Multi-cylinder hydraulic cone crusher
1. According to the particle size and abrasiveness of the feed
The feed opening on the tight side of the crusher cannot be smaller than the maximum feed particle size. The feed opening should not be too large or too small.
If the feed opening is too large:
The materials are mainly concentrated in the lower part of the crushing cavity for crushing, resulting in excessive wear on the lower part of the liner and low utilization of the liner.
If the entrance is too small:
① Materials cannot enter the crushing cavity, production capacity is severely reduced, and the feed port lining is severely worn or even damaged.
② The crushing force fluctuates greatly, the adjustment ring jumps, damages the frame seat lining, accelerates the wear of the locking cylinder seal, and affects the stability of the equipment.
2. According to the output particle type and particle size
The product particle size depends on whether the crushing process is open circuit crushing or closed circuit crushing.
Generally speaking, the tight side discharge opening of the crusher is equal to the mesh size or slightly larger than the average particle size of the required product. Each cavity has a minimum discharge opening, and the minimum discharge opening should be avoided when selecting the cavity.
Relatively speaking, a smaller crushing cavity can be equipped with a smaller discharge opening to better adjust the discharge opening. The crushing cavity is small, making it easier to obtain good particle shape. In terms of product particle shape, the short-head crushing cavity can obtain better product particle shape, followed by the standard fine cavity type. In order to ensure good particle shape of the product, the crushing ratio should be controlled at 3 to 3.5.
Multi-cylinder hydraulic cone crusher, how to choose the cavity type of cylinder hydraulic cone crusher, multi-cylinder hydraulic cone crusher model
Multi-cylinder hydraulic cone crushers require a good crushing system, correct cavity selection and standardized operating methods in order to give full play to the greater value of multi-cylinder hydraulic cone crushers, so here we suggest that you should also consider many aspects when choosing , for your convenience, you can directly call the Zhengzhou Global Heavy Industry customer service hotline +8613383841555, and we will customize it one-on-one for you!