Vibrating feeder

Description

Vibrating feeder is also known as vibrating feeder, also known as vibrating feeder. ZSW series vibratory feeder produced by our company is a new type vibratory feeder designed for evenly conveying bulk materials before crushing and screening medium coarse crusher. The vibrating feeder adopts the structural characteristics of double eccentric shaft exciter to ensure that the equipment can withstand the impact of falling bulk materials and has large feeding capacity. In the production process, the bulk and granular materials can be uniformly, regularly and continuously given from the storage bin to the receiving device, so as to prevent the receiving device from crashing due to uneven feeding and extend the service life of the equipment. Vibrating feeder can be divided into steel plate structure and grate structure, steel plate structure feeder is mostly used for sand and stone production line, the material evenly into the crushing equipment; The feeder with grate structure can coarse screen the material, which makes the system more economical and reasonable in preparation. Therefore, vibration feeder is widely used in metallurgy, coal mine, mineral processing, building materials, chemical, abrasive and other industries crushing, screening combined equipment.

Performance Advantages

• Vibratory feeder has simple structure, uniform feeding, good continuous performance and adjustable exciting force; Timely change and control flow, easy to operate
• Special grate design can effectively prevent channel blockage, and play a primary screening of materials, and improve production efficiency. The spring device buffers the vibration of the body, effectively avoids the damage of the body, and prolongs the service life
• Equipment small size, light weight, simple structure, no rotating parts, less wearing parts, easy maintenance.
• The vibrating feeder can adjust the exciting force, change and control the flow rate at any time, and the adjustment is convenient and stable

Can evenly adjust the amount of ore, generally used for loose materials. According to the performance requirements of the equipment, the configuration design should minimize the pressure of the material on the tank body, the effective outlet of the warehouse material should not be greater than one quarter of the width of the tank, and the flow speed of the material should be controlled at 6-18m/min. For the material with large feeding amount, the stopper plate of sufficient height should be set at the bottom of the bin. In order not to affect the performance of the feeder, the stopper plate shall not be fixed on the tank body. In order to enable the smooth discharge of the bin, the Angle of the rear wall of the bin should be designed to be 55-65 degrees.

Working Principle

The vibrating feeder is composed of a feeding tank, a vibration exciter, a spring support, a transmission device, etc. The vibration source of the vibration feed of the channel body is the exciter, which is composed of two eccentric shafts (main and passive) and gear pairs. The motor drives the drive shaft through the triangle belt, and then rotates the passive shaft of the gear meshing on the drive shaft. The main and passive shafts rotate in reverse at the same time, so that the channel body vibrates and the material flows continuously to achieve the purpose of conveying the material.

More Pictures

Question&Answer

Q：Are you the manufacturer?

A：Yes, we are a professional mining machinery manufacturer, the factory address is in Zhengzhou, Henan, China

Q：Can the ore raw material just blasted be used directly

A：The feed port of this machine is required to be ≤1000mm ore raw material

Technical Data: